To do
Send budget to Chris
- Cost of installation of gas + electricity
- Cost of sockets
Windows
- Dripline
- Overhang protector/rain cover/flashing (metal)
- Roof corner flashing
- Abutment flashings can be used to flash the top of lean-to roofs to ensure a watertight finish, and can also be used where roofs meet walls. They provide the same functionality as a standard barge board but the painted finish is on the internal angle.
- Trim Board (outside architrave)
- Oil based Primer
- Brown Demidekk paint
- Handle for main window
- L braces
- Fill gap with Foam
Roof
- Soffit & Facials
- Oil Primer
- Green Demidekk Paint
- Batten
- Cladding 25 x 35 mm
- 7x battens, 40 cm apart approximately
- Start on edges
- Arc < 2.5 m
- Barge Board (fascias located at the gable end or side of a roof)
- Add 2x4 on top of the other one
- Fix with battens using offcuts
- Add extra piece at the ends
- Oil Primer
- Green Demidekk Paint
Walls
- Batten
- Cladding 19 x 35 mm.
- Cladding
- 6 cm gap (10 cm under plank) in between
- Plane outside no more than 1mm
- Trim around windows
Interiors
- Ceiling + ply paint white
- Wood Filler (2 parts) gaps & nails
- Caulking for large cracks and screw holes on visible wood in porch
- Primer (2 coats)
- White (2 coats)
- MDF Walls
- Nails with Punch
- Honey Dew Paint
- Skirting Board - nail to the wall, paint white
- Mouldings (scarf joint away from door), paint Honeydew
- Architrave (frame with mouldings around a door or window), paint white
- Double Door
- Frame
- Door Stop strip
- Handle + Lock
- Sanding (use steel wool for cleaning first)
- Apply mahogany stain lightly, one or two coats.
- Bamboo Floor
- Decking, leave untreated
- Buddha Shelf
- Inside platform (bed)
- Higher than a chair ?
- Electric Socket (link, Knightsbridge IN008 IP44 Angled Surface Mount Socket 2P+E, 230 V, 240V 16A, Item dimensions L x W x H 8.5 x 7 x 12.8 centimetres), also see email from Nyanadassano
Under
- Storage under porch
- 2x4 + shelves